We keep in stock a large number of various mounts for the SeaDoo engine range in our Workshops in Poole, these are one of the most important parts within your Jetski holding the engine in place, if all mounts fail you could sink, strip drive shaft splines and damage various other components.
To check mounts pull the engine in a upwards direction to feel for excessive movement, a minimal amount should be noted as the rubber is designed to give a small degree of movement.
Typically each mount takes around a hour to change firstly heating the fixtures to help prevent shearing and the ensuring the thru hull fixings threads have been tapped and cleaned thoroughly to ensure the bolt does not bind during installation.
Feel free to get in touch with your part requirements or if you need any advice.
2002-2021 Seadoo 4-stroke craft rear engine mounts have remained unchanged throughout the years.
The part numbers have changed though a list provided below.
0460193 MOUNT-RUBBER
270000882 RUBBER MOUNT
270000510 RUBBER MOUNT, BLACK
270000882 RUBBER MOUNT
270000612 RUBBER MOUNT, BLACK
270000669 RUBBER MOUNT
270000882 RUBBER MOUNT
270001077 RUBBER MOUNT
270000633 RUBBER MOUNT, BLACK
270000882 RUBBER MOUNT
270001011 RUBBER MOUNT
270001077 RUBBER MOUNT
270000688 RUBBER MOUNT
270001077 RUBBER MOUNT
Current Part Number is
270001099 SUPPORT_ENGINE ASSY REAR ENGINE MOUNT.
The front engine mounts have changed slightly though, 2002-2008 Seadoo's have the same front engine mount as pictured.
270000489 RUBBER MOUNT, BLACK
270000690 RUBBER MOUNT
270000885 RUBBER MOUNT
270001029 RUBBER MOUNT
270001076 RUBBER MOUNT
Current PN 270001096 SUPPORT_ENGINE ASSY